Advanced aircraft design : conceptual design, analysis, and optimization of subsonic civil airplanes - Torenbeek, Egbert (Chichester, West Sussex, United Kingdom : Wiley, 2013)
9.2.1.Installed Take-Off Thrust -- 9.2.2.The Thumbprint -- 9.3.Low Speed Requirements -- 9.3.1.Stalling Speed -- 9.3.2.Take-Off Climb -- 9.3.3.Approach and Landing Climb -- 9.3.4.Second Segment Climb Gradient -- 9.4.Schematic Take-Off Analysis -- 9.4.1.Definitions of Take-Off Field Length -- 9.4.2.Take-Off Run -- 9.4.3.Airborne Distance -- 9.4.4.Take-Off Distance -- 9.4.5.Generalized Thrust and Span Loading Constraint -- 9.4.6.Minimum Thrust for Given TOFL -- 9.5.Approach and Landing -- 9.5.1.Landing Distance Analysis -- 9.5.2.Approach Speed and Wing Loading -- 9.6.Engine Selection and Installation -- 9.6.1.Identifying the Best Match -- 9.6.2.Initial Engine Assessment -- 9.6.3.Engine Selection -- Bibliography -- 10.Elements of Aerodynamic Wing Design -- 10.1.Introduction -- 10.1.1.Problem Structure -- 10.1.2.Relation to Engine Selection -- 10.2.Planform Geometry -- 10.2.1.Wing Area and Design Lift Coefficient -- 10.2.2.Span and Aspect Ratio -- 10.3.Design Sensitivity Information -- 10.3.1.Aerodynamic Efficiency -- 10.3.2.Propulsion Weight Contribution -- 10.3.3.Wing and Tail Structure Weight -- 10.3.4.Wing Penalty Function and MTOW -- 10.4.Subsonic Aircraft Wing -- 10.4.1.Problem Structure -- 10.4.2.Unconstrained Optima -- 10.4.3.Minimum Propulsion Weight Penalty -- 10.4.4.Accuracy -- 10.5.Constrained Optima -- 10.5.1.Take-Off Field Length -- 10.5.2.Tank Volume -- 10.5.3.Wing and Tail Weight Fraction -- 10.5.4.Selection of the Design -- 10.6.Transonic Aircraft Wing -- 10.6.1.Geometry -- 10.6.2.Wing Drag in the Design Condition -- 10.6.3.Modified Wing Penalty Function -- 10.6.4.Thickness Ratio Limit -- 10.6.5.WPF Affected by Sweep Angle and Thickness Ratio -- 10.7.Lift Coefficient and Aspect Ratio -- 10.7.1.Partial Optima -- 10.7.2.Constraints -- 10.7.3.Refining the Optimization -- 10.8.Detailed Design -- 10.8.1.Taper and Lift Distribution -- 10.8.2.Camber and Twist Distribution -- 10.8.3.Forward Swept Wing (FSW) -- 10.8.4.Wing-Tip Devices -- 10.9.High Lift Devices --
Includes bibliographical references and index.
Description based on print version record and CIP data provided by publisher.
Keywords: Transport planes -- Design and construction; Jet planes -- Design and construction; Airplanes -- Performance; TRANSPORTATION -- Aviation -- General; Airplanes -- Performance; Jet planes -- Design and construction; Transport planes -- Design and construction; Electronic books; Electronic books